Filter
Top Products
Ver. 1.6
8/3/2009 - 10 -
To set *86 as the default voicemail number:
• From Configuration Mode, press
.
To set #86 as the default voicemail number:
• From Configuration Mode, press
.
Restore User Defaults
To restore your TN2300-DV SERIES to its default settings after changing
configuration settings:
• From Configuration Mode, press <0 or
1> , where
0 = Keep Current Settings and 1 = Restore to Default Settings.
# * 1 0 7 * #
NoteTo access your voicemail, you will have to use the Direct Dial method of
voicemail retrieval (see above
For information about your voicemail service, please contact your service
provider.0 #
# # * 1 0 1 *
Note: The voicemail settings for your TN2300-DV SERIES should have been
configured prior to purchase. The instructions for Voicemail Number and One-
Touch Voicemail Retrieval are mainly for your reference.
Using Additional Hardware Devices
Using an External Answering Machine
The TN2300-DV SERIES can be used with an external answering machine in
place of voicemail. If you plan to use an external answering machine, be sure
your service provider has not activated voicemail on your account
Setting Up Data Transfer for a Digital Video Recorder (DVR) or Satellite
Receiver
The TN2300-DV SERIES can be configured to dial out over your phone line so
that a Digital Video Recorder (DVR) or a satellite receiver can send and receive
the data required for its operation. Your DVR or satellite receiver must also be
configured to tell the TN2300-DV SERIES that it needs to send data. You must
insert the prefix
before the phone number that the DVR or
satellite receiver dials. Consult your DVR or satellite receiver manual or provider
if you need further assistance with this feature.