Filter
Top Products
Ver. 1.6
8/3/2009 - 3 -
2. Listen for a dial tone. (If you hear a No Service to
ne [fast beeping], hang up
and try again. If the No Service tone continues, contact your service provider to
verify that cellular service is available.)
3. Dial a phone number. (When you have finished dialing, the call will be sent
automatically.)
TIP:
Pressing the Flash key or pressing and releasing the switch-hook after
dialing a number will send the call immediately.
Receiving Calls
• When the telephone rings, pick up the handset and begin talking.
Ending Calls
• When you are finished with a call, hang up the phone by placing the handset
back on the telephone cradle or by pressing the Off or End button.
Using In-Call Features
To place a call on hold:
• During a call, press the Flash key on your handset (if your phone doesn’t have
a Flash key, press and release the switch-hook).
· If you hang up your phone when a call is on hold, the call will be disconnected.
To retrieve a call on hold:
• Press the Flash key on your phone (or press and release the switch-hook).
To answer a call waiting call:
• When you’re on an active call and a new incoming call arrives, you will hear a
short tone on your phone. To place the current call on hold and answer the
incoming call, press the Flash key on your phone (or press and release the
switch-hook). (To switch between calls, simply repeat the process.)
To answer a call when you are dialing or with the ph
one off the hook:
• If a call comes in while you are dialing or when you have the phone off the
hook, you will hear a call waiting tone on your phone. To answer the incoming
call, press the Flash key on your phone (or press and release the switch-hook).
Note: Call Hold and Call Waiting are not available with all service providers.
These services may not be available if you are using your TN2300-DV SERIES
in a roaming area. To determine these services’ availability in your area, contact
your service provider.
Tip: Pressing the Flash key or pressing and releasing the switch-hook after
dialing a number will send the call immediately.
Accessing Your Voicemail
To access your voicemail using One-Touch Voicemail Retrieval:
• Press and hold the
button on any home phone for two seconds.
To access your voicemail using Direct Dial: