Filter
Top Products
About Truecharge™ 2 Battery Charger
975-0401-01-01 2–7
Using the Onboard Display Panel
To configure the battery temperature:
NOTE: By default, the Battery Temp. is set to Warm.
1. Press and hold the Battery Temp. Select button for three
seconds to advance to the next setting.
2. Select the appropriate battery temperature setting.
The LEDs will indicate which of the three types is being
selected: Warm, Hot, or Cold.
Using the Remote Panel
To configure the battery temperature:
NOTE: By default, the Battery Temp. is set to Warm.
1. Press and hold the Status button for five seconds to enter
the Setup mode.
Entering the Setup mode will enable you to select the
battery temperature setting.
2. Press Status button to select the appropriate battery
temperature setting.
The LEDs will indicate which of the three types is being
selected: W(arm), H(ot), or C(old).
3. Press and hold the Status button for five seconds to exit
the Setup mode.
Note: Cold is for battery temperature below 5 °C (41 °F). Warm
(default setting) is for battery temperature between 5 and 30 °C
(41 and 86 °F). Hot is for battery temperature above 30 °C
(86 °F). See “Battery Temperature Compensation Levels” on
page 2–8 to see how output voltage is offset by varying the
temperature selection.