Filter
Top Products
Indicator LEDs on the Onboard Display Panel and Optional Remote Panel
975-0401-01-01 3–3
Indicator LEDs on the Onboard Display
Panel and Optional Remote Panel
All indicator LEDs on the Onboard Display panel (and the
optional remote panel, if installed) will illuminate for one
second when AC (or DC) power is supplied to the
Truecharge™ 2 Battery Charger or when the charger is turned
on using the
ON/STANDBY button on the remote panel. A
“power on” test indicates that the charger is now receiving
AC power, and all LEDs are functioning.
The Truecharge™ 2 Battery Charger will recover from fault
conditions automatically when the cause of the fault or
warning has disappeared. In most cases, the charging process
should be stopped, allowing either the charger or the battery
or both to return within acceptable operating ranges. See
Appendix A, “Specifications” for more information on
normal operating ranges.
To interrupt or cease the charging process, disconnect the AC
power source from the charger. If you have a remote panel,
you can put the charger in Standby mode by pressing the
ON/STANDBY button to interrupt the charging process.