Xantrex Technology 30 Battery Charger User Manual


 
11
LINK 2000
The Link 2000 has the same features as
the Link 1000, providing inverter/charger
control and complete battery state-of-charge
information. It monitors two battery banks.
OPTIONAL REMOTE CONTROL PANELS
Remote Control Panel
An optional remote control panel is
available. The LED bar graphs on the remote
control panel show battery voltage and DC
current in both inverter and charger modes.
Easy-to-see red, yellow and green LEDs
show the battery state-of-charge. Power
Sharing, charger ON/OFF, and inverter ON/
OFF controls are provided. SET UP features
include selection of Idle Threshold, Battery
Type and Battery Capacity.
Advanced Remote Control Panels
Link Instruments
Advanced remote control panels are also
available: the Link 1000, 2000 and 2000-R.
LINK 1000
Link 1000 controls the Freedom Inverter/
Charger and provides complete battery
state-of-charge information including DC voltage,
current, amp hours consumed, Time
Remaining and historical data for a single
battery bank.
LINK 1000
LINK 2000
LINK 2000-R
The Link 2000-R adds the ability to
regulate an engine-driven alternator. The
precision regulator in the Link 2000-R allows
the alternator to be controlled as a three-stage
battery charging system.
If a Link Instrument is used to control the
inverter/charger, refer to the Link Owner’s
Manual for installation, setup and control
information.
Remote Control Panel