Filter
Top Products
Troubleshooting
3–2 975-0401-01-01
Care and Maintenance
The Truecharge™ 2 Battery Charger contains solid-state
electronic components that require no maintenance. The best
care you can give the charger is to protect it from contact with
liquids, spray, or fumes which may cause corrosion and by
keeping the air intake vent clean and free from any
obstructions.
Disconnect all AC and DC power and clean the outside of the
case and wiring with a damp cloth. Wear protective gloves, if
you suspect it has come in contact with battery fluid, salt
water, gasoline or oil, or other corrosive material. Do not
operate if the charger contains moisture of any kind.
Periodically, disconnect all AC and DC sources and check all
DC and AC wiring connections to be sure they have not
loosened or deteriorated. Also check all cable clamps to
ensure they are tightly fastened.
Loose battery terminals and lugs exposed to open air corrode
rapidly. The corrosion appears as a white powder or granular
foam on the terminals and any nearby exposed metal parts. If
it contacts your skin, it will cause burns unless you rinse it off
immediately.
To clean battery terminals, follow the recommendations and
procedures of the battery manufacturer.
WARNING: Risk of electric shock
The Truecharge™ 2 Battery Charger contains no user serviceable
components. Do not open or disassemble the charger. Attempting
any kind of service will void your warranty. Contact your dealer or
the manufacturer for service information.