Xantrex Technology 50A12V Battery Charger User Manual


 
Troubleshooting
3–10 975-0401-01-01
Table 3-2
Charger Status LED Sequences on the Truecharge™ 2
Battery Charger
Charger Status LED
Activity Charger status
Ready LED illuminates
solid
The charger is in standby (or rest) mode of two-
stage charging. All batteries have been fully
charged.
Ready and Charging
LEDs illuminate solid
The charger is in float mode of three-stage charging.
All batteries have been fully charged.
Charging LED
illuminates solid
The charger is charging in bulk or absorption mode
Equalize LED flashes The charger will perform an equalization cycle after
the absorption stage.
Equalize LED
illuminates solid
The charger is currently implementing an
equalization cycle for all batteries.
Fault LED flashes A warning condition. See “Interpreting Fault and
Warning Indicators” on Table 3-1.
Fault LED illuminates
solid
A fault condition. See “Interpreting Fault and
Warning Indicators” on Table 3-1.