Xantrex Technology HF 1800 Battery Charger User Manual


 
4–2 975-0390-01-01
Display Panel Operation
The Freedom HF features a display panel with three-digit LED display to
show inverter, AC source, and battery status information.
Feature Description
1 Inverter button
Press and hold for one second to turn the Freedom HF’s Inverter function ON or OFF
(when AC Shore Power is NOT present.)
Press and hold for five seconds to go into Charger Current Select Mode.
2 Three-digit LED display screen shows status information and fault codes.
3 Status LED Indicates the mode of operation with a three-color LED.
Green pertains to Utility status.
Solid indicates the Freedom HF is in shore power mode and battery is fully charged.
Flashing indicates the Freedom HF is in shore power mode and the unit is currently
charging the battery.
Yellow pertains to Battery status.
Solid indicates the Freedom HF is in inverter mode and using the battery to provide
AC power.
Flashing indicates the Freedom HF is in inverter mode but AC shore power is
detected thus transferring to shore power mode within 20 seconds.
Red indicates a Fault condition and the Freedom HF has shut down. See
“Troubleshooting Reference” on page 5–8.
4 Select button
In Inverter mode, press the button to choose what appears in the three-digit LED
display: Input Voltage, Input Current, or Output Power. See “To adjust what is
being displayed on the screen:” on page 3–3.
NOTE: A corresponding LED lights up for each of the three items.
In an Alarm condition, press and hold for two seconds to disable (or enable) the audible
alarm. See “To adjust the alarm setting:” on page 3–4.
In Charger Current Select Mode, press to select the charger current. See “To adjust the
charging current:” on page 3–4.
FREEDOM
HF 1000
Input Voltage (V)
Select
STATUS
Battery
Fault
Utility
Input Current (A)
Output Power (kW)
4
1
2
3
Freedom HF 1000 shown
See NOTE in Feature # 4 below.
Freedom HF Owners Guide.book Page 2 Friday, December 21, 2007 2:18 PM