Using 6416SW Trap Messages
A trap message is sent to the 6416SW local console when a configuration change is
made or when an error occurs in the ATM subsystem.
For example, if an ATM module is removed from a ONcore hub, a message describing
this change is sent to the console. A sample message is shown here:
Change trap on module 2
The first field in the trap message is described in Table 7-1. The other fields of
information that can appear are self-explanatory and depend on the type of trap
received.
Table 7-1. 6416SW Trap Messages
Field Contents
Enterprise Specific Trap One of the following messages appears:
Configuration Change in System
Configuration Change in Module X
Configuration Change in Port X.Y
Hello
Authenticity Failure from
Manager X
7-50 ONcore ATM Switch/Control Module: Installation and User's Guide
