VCX Data Server Maintenance 33
VCX Data Server
Maintenance
This section provides maintenance tasks that are specific to just the VCX
data server.
Restarting the VCX
Data Server
To restart the VCX data server:
1 From the EMS explorer tree, navigate to the 3Com VCX Data Server.
2 Right-click the VCX data server and select Maintenance and then click
Hard Restart.
Shutting Down the
VCX Data Server
To shut down the VCX data server:
1 From the EMS explorer tree, navigate to the 3Com VCX Data Server.
2 Right-click the VCX data server and select Maintenance and then click
Hard Shutdown.
Reserved by Indicates who has reserved the object. Read-only
Software status The current operational state of the entity. If
AdminStatus is down, then OperStatus should
be down. If AdminStatus is changed to up,
through the entity command interface, then
OperStatus should change to up if the entity
is operational; it should remain in the down
state if and only if there is a fault that
prevents it from going to the up state; it
should remain in the notPresent state if the
entity has missing components. If the entity is
operational, but not responding to queries,
the state is notResponding.
Read-only
Default = up
Usage State Indicates how busy the resource is. Read-only
Table 10 State Tab (continued)
Attribute Description Settings
