© Adam Equipment Company 2010
20
• To view the total in memory press the [Print] key when the scale
is at zero. The display will show the total number of accumulation
"ACC xx" and the total weight before returning to zero.
• To print the total, press [Print] to recall and then immediately
press [Print] the second time to print the results.
• To erase the memory, press [Print] to view the total and then
immediately press [CE] to clear the memory.
10.8.2 Automatic Accumulation
When the scale has been set to Automatic Accumulation the value is stored
in memory automatically.
• Place a weight on the scale. The beeper will sound when the
scale is stable indicating the value is accepted. Remove the
weight.
• The display will show "ACC 1" and then the total in the memory
before it returns to zero. Adding a 2
nd
weight will repeat the
process.
• While the weight is on the scale, press the [Print] key to view the
values- first the accumulation number "ACC x" and then the total
will be shown.
NOTE:
1. The scale will not show the value when a weight is removed.
2. In all cases the scale must return to zero or a negative number,
before another sample can be added to the memory.
3. More products can be added and [Print] be pressed again for
up to 99 entries until the capacity of display is exceeded.
