© Adam Equipment Company 2010
21
11.0 SERIAL INTERFACE
The CBK Series are supplied with bi-directional RS-232 interface and an
optional USB serial interface as standard. Both interfaces send and receive
identical information. See samples below.
Specifications:
Connector:
RS-232
9 pin D-subminiature socket
Pin 3 Output
Pin 2 Input
Pin 5 Signal Ground
USB
Standard Type B USB
connector
A driver to allow a simple connection from the USB interface to a PC is
available on the Adam Equipment web site.
The scale can be set to print text in English, French, German or Spanish.
The label format described below is normally enabled. To disable the label
format or change other parameters see the Serial Interface parameters
section for details.
LABEL FORMAT = On
Data Format-Normal Output:
Only weight value along with the weighing unit is printed. If Percent weighing
is used then % is shown in place of weighing units.
Date 12/09/2006 <cr><lf>
Time 14:56:27 <cr><lf>
<cr><lf>
Scale ID 123456 <cr><lf> If ID is zero, it is left blank
User ID 234567 <cr><lf>
<cr><lf>
Net Wt 1.234 Kg <cr><lf> Net Wt. (or Gross Wt.)
<cr><lf>
<cr><lf>
<cr><lf>
<cr><lf>
RS-232 output of weighing data, optional USB Interface
ASCII code
Adjustable Baud rate, 600, 1200, 2400, 4800, 9600 and 19200 baud
8 data bits
No Parity
