© Adam Equipment Company 2010
30
Scale will perform the following, depending on the Accumulation and Print
Settings:
A
CCUMULATION
SETTINGS
PRINT SETTINGS
AC on
AC Off
AUto
Accumulate and print
automatically
Print again when [Print]
key pressed,
Print automatically,
Do not accumulate
Print again when [Print] key
pressed,
mAn
Accumulate and Print only
when [Print] key pressed
Print again when [Print]
key pressed,
Print when [Print] key is pressed,
Do not accumulate.
Print again when [Print] key
pressed,
Cont
Print continuously.
Accumulate when
[Print] key is pressed
[Print] key no function
after first time
Print continuously.
Do not accumulate.
[Print] key no function
13.3 SCALE PARAMETERS
• Shortcut to enter this group is to press and hold the [Count] Key for 4
seconds. The display will go directly to “S1 Un ”.
• Press [Func] to view the list of parameters.
• Press [Tare] to enter a parameter. Press [Func] to view the options for
the parameter settings.
• Press [Tare] to confirm the change and then advance to the next
parameter by pressing the [Func] key.
• Press [Zero] to return to the group “FUnC 3”. If you press [Zero] again,
the scale will exit the User Parameter section and return to normal
weighing.
