A SERVICE OF

logo

2-12
Windows 2000 Plug and Play
The following is the installation procedure of Plug and Play using a USB port, under Windows
2000.
Before you install the software, make sure you do the following:
Connect the machine to your computer ( Quick Start Guide).
Turn on the machine ( Quick Start Guide).
Start up Windows 2000.
Windows NT/2000/XP/Server 2003
USB Users
NOTE
Using a USB Port (USB Cable)
In order to use the printer via USB, your computer must be equipped with a USB port.
USB is not available for Windows NT.
1 Log on as a member of Administrators. The full control access right for the printer is
necessary for installation of CAPT.
2 Plug and Play is being carried out, and the USB class driver and USB printing support is
automatically detected and installed.