Chapter 9 Special Features 9-7
Special Features
Sending a Document Stored in Memory
Follow this procedure to send a document received in memory:
1 Open the one-touch speed dial panel.
2 Press Memory Reference.
3 Use ∂ or ¨ to select RESEND
DOCUMENT.
4 Press Set.
Ex:
5 Use ∂ or ¨ to select the transaction
Ex:
number (TX/RX NO.) of the
document you want to send.
• If you are unsure of the transaction
number (TX/RX NO.), print the DOC.
MEMORY LIST (1 p. 9-5).
• A “#” before the transaction number
(TX/RX NO.) indicates that that
document is being sent or printed at that
moment, and can therefore not be
selected.
• Use ¬ or ® to display details of the
transaction (e.g. destination).
6 Press Set.
7 Enter up to 125 fax numbers you want
to send to using any of the following
methods:
❚ One-touch speed dialling:
Press the one-touch speed dialling
Ex:
button(s) you want.
❚ Coded speed dialling:
Press Coded Dial, then use the
Ex:
numeric buttons to enter the two-
digit code you want. Repeat for
Ex:
other codes.
• Be sure to press Coded Dial before
each code.
TEL=03 3758 2111
A01
TEL=905 795 1111
TEL=
SELECT LOCATIONS
TX/RX NO. #5003
TX/RX NO. 0001
RESEND DOCUMENT
DOC. MEMORY LIST
