Appendix D Options D-3
Options
Attaching the Handset to Your FAX
Follow this procedure to attach the handset to your FAX:
1 Use a screwdriver to remove the two
covers on the left side of the unit.
2 Remove the screws from the plugs
and insert the plugs into the holes on
the handset cradle.
3 Insert the plugs (with the handset
cradle) into the holes on the unit.
• If you have difficulty inserting the plugs,
turn the unit so that the left side is
facing you and the right side is against a
wall.You can now insert the plugs
without the unit moving.
4 Use your finger to push the screws
into the plugs.
• If you have difficulty, use a cross-point
screwdriver to push the screws all the
way into the plugs. (Do not screw them
in as the screws may break.)
• Make sure you support the unit when
inserting the screws.
5 Place the handset in its cradle and
connect the handset cord to the h
jack.
