Electrolux FOM 71 CLS Manual

A SERVICE OF

next previous

16:1

Adjustment of temperature, speed and water

FOM 71 MP-Lab

Adjustment of temperature, speed and water

In contrary to Wascator FOM 71 CLS, there is little scope to change or

calibrate the internal parameters of the FOM 71 MP-Lab software.

Temperature:

• Ifthetemperatureofawashprogramistoohighortoolowduringthe

main wash sequence, the temperature sensor must be replaced.

Speed:

• Ifspeedistoolow(washspeedand/orspinspeed),checkincoming

voltage and frequency.

• Ifspeedistoohigh(washspeedand/orspinspeed)checkincoming

voltage and frequency. Also check to see whether the V-belt is exhibit-

ing signs of excessive wear. Changing to a new V-belt will/may reduce

the speed somewhat.

Water:

• Forleveladjustment,seeChapter13.

• Forowmeteradjustment,seeChapter17.