The Epson Scanner Utility Setup program collects information
about your system and installs everything you need to use
Epson TWAIN with TWAIN-compliant applications, including:
U
Epson TWAIN
0
Epson Scanner DOS Device Driver.
If you are using an Adaptec SCSI adapter, the Setup program
also prompts you to insert the Adaptec ASPI DOS Manager
diskette and installs the SCSI support software from
that
diskette.
If you change interfaces, for instance, from
an
Adaptec SCSI to
a bi-directional parallel interface, you need to run the Setup
program again.
Starting the Epson TWA/N Setup Program
Follow these steps to start the Epson TWAIN Setup program
using Windows:
1.
If you are not already in Windows, start Windows.
2.
Insert the Epson Scanner Utility diskette in your diskette
drive.
3.
From the File menu in the Program Manager or File Manager,
select
Run. The Run dialog box appears.
4.
Type the letter of the drive containing the diskette, followed
by
SETUP
.
For example:
A:SETUP
5.
Select OK or press Enter. The screen displays this message:
Initializing Epson TWAIN Setup . . .
2-2
Installing Epson TWAIN
