A SERVICE OF

logo

Open as PDF
next previous
To Modify
a
Scan
Mode
You can modify any of the scan modes. Follow these steps:
1.
Select the name of the scan mode you want to modify.
2.
Change the Pixel Depth and Halftone values, as needed.
3. Select Modify.
4.
Select OK to accept your changes or Cancel to discard them.
Use the following table if you need to reset the defaults of your
Epson-supplied scan modes once you have modified them.
Epson-supplied Scan Mode Defaults
Scan Mode
Pixel Depth
Black & White Line Art
Black and White
Halftone
None
Black &White Halftone Black and White
Hard Tone
Black &White Photograph 256 Gray
None
Color Chart
16 Colors
None
Color Halftone
Color Photograph
16 Colors
256 Colors
Hard Tone
None
True Color
True Color
None
To Delete a Scan Mode
Follow these steps to delete a scan mode:
1.
Select the name of the scan mode you want to delete. You see
the Pixel Depth and Halftone values for the selected scan
mode.
2. Select Delete.
3.
Select OK to accept your changes or Cancel to discard them.
Using TWAIN 3-13