A SERVICE OF

logo

Open as PDF
next previous
Use the templates below to connect the SMD101 player to SME100 encoder streams.
Substitute the SME100 IP address for <SME100_IP>.
PULL Streaming: URL
RTSP Unicast
RTSP://<SME100_IP>/extron
RTSP Multicast
RTSP://<SME100_IP>/extron
or
HTTP://<SME100_IP>/web/multicast.sdp
Table 1. Pull Stream URLs
PUSH Streaming:
Unicast
TS/UDP
UDP://@:<DESTINATION_PORT>
TS/RTP
RTP://@:<DESTINATION_PORT>
ES/RTP
HTTP://<SME100_IP>/web/output1.sdp
Multicast (<DESTINATION IP> address must be the multicast IP address)
TS/UDP
UDP://@<DESTINATION_IP>:<DESTINATION_PORT>
TS/RTP
RTP://@<DESTINATION_IP>:<DESTINATION_PORT>
ES/RTP
HTTP://<SME100_IP>/web/output1.sdp
Table 2. Push Stream URLs
NOTES:
• <SME100_IP> is the IP address of the SME100 encoder.
• UDP and RTP DESTINATION_PORT default is 60000.
• For ES/RTP, SAP is available in "Video only" stream mode.
4. Add the SME100 user name and password.
http://admin:123456@192.168.254.254/web/extron.sdp
http:192.168.254.254/web/extron.sdp
5. Press <Enter> to load the stream.
The stream loads. If Load Play is active, the stream begins playing. If Load Play is not active,
press play (see Player Controls on page16) to play the stream.
SMD101 • Advanced Player Configuration 55