A SERVICE OF

logo

Print Quality
6-16
HP DesignJets 1050C and 1055CM Printers Service Manual
2 Go to the Printer submenu and press Enter.
3 Perform the Printhead Alignment Calibration by going to Utilities/
Calibration/Printhead Alignment. Please wait as the process of
aligning the printheads takes a few minutes.
4 Reprint the image you were attempting to print before (in the same
mode) to see if the problem still exists.
Ready
MAGENTA
YELLOW
BLACK
CYAN
Ink
Printer submenu
Utilities
Calibrations
Printhead Alignment