System Error Codes
2-9
HP DesignJets 1050C and 1055CM Printers Service Manual
System Error: 060301
Problem
Description:
One of the Printheads has an Internal Electrical Problem.
Corrective Action: Try the following:
Remove all the Printheads and clean the flex contacts on the
Printheads and in the Carriage Assembly (Refer to Chapter 2).
Perform the Electronic Systems Test ⇒ Page 4-5.
Make sure that the Trailing Cable is connected correctly.
Replace the Trailing Cable ⇒ Page 8-39.
Replace the Carriage Assembly ⇒ Page 8-44.
If the error code continues, replace the Electronics Module ⇒
Page 8-25.
WARNING Only replace one component at a time and check if the error has
gone before replacing another component. Using this procedure
you will be able to determine exactly which component failed.
System Error: 060305 0000000X
Problem
Description:
Thermal Shutdown error (one of the Printheads has gone above the
maximum Temperature).
Error Data:
00000000 Cyan Printhead Failed.
00000001 Magenta Printhead Failed.
00000002 Yellow Printhead Failed.
00000003 Black Printhead Failed.
Corrective Action: Try the following:
Replace the failing Printhead.
If the problem remains after replacing the failing Printhead then
check if the customer is using a 3rd Party RIP. If a 3rd Party RIP
is being used, check the Print Settings in the RIP or try printing
one of the Internal Demo Prints to see if the problem is solved
without the RIP.
