A SERVICE OF

logo

Removal and Installation
8-65
HP DesignJets 1050C and 1055CM Printers Service Manual
3. Remove the T-10 screw (item 1) from the linkage rod (item 2) and
the pinch-wheel cam (item 3) (refer to Figure 70).
Figure 70: Linkage Rod
NOTE For steps 4 and 5, refer to Figure 71.
4. Release the right side of the paper entry assembly (item 1) from a
retaining hole in the right hand side chassis.
5. Remove the right side of the paper entry assembly (item 1) first and
then the left side.
Figure 71: Paper Entry Assembly
C607420c
1
2
3
C607424
1