Control-panel menus
These menus are available from the control-panel main menu:
●
Use the Phone Book menu to open the list of entries in the fax phone book.
●
Use the Fax Job status menu to display a list of all faxes that are waiting to be sent, or have been
received but are waiting to be printed, forwarded, or uploaded to the computer.
●
Use the Fax functions menu to configure fax functions such as scheduling a delayed fax,
cancelling the Receive to PC mode, reprinting faxes that were previously printed, or clearing faxes
that are stored in memory.
●
Use the Copy setup menu to configure basic copy default settings such as contrast, collation, or
the number of copies printed.
●
Use the Reports menu to print reports that provide information about the product.
●
Use the Fax setup menu to configure the outgoing and incoming fax options and the basic settings
for all faxes.
●
Use the System setup menu to establish basic product settings such as language, print quality,
or volume levels.
●
Use the Service menu to restore default settings, clean the product, and activate special modes
that affect print output.
●
Use the Network config. menu to establish network configuration settings.
Table 2-1 Phone Book menu
Menu item Sub-menu item Description
Phone Book Add/Edit
Delete
Delete all
Edits the fax phone book. The product supports up to 100 phone book entries.
Table 2-2 Fax Job status menu
Menu item Description
Fax Job status Displays pending fax jobs, and allows you to cancel pending fax jobs.
Table 2-3 Fax functions menu
Menu item Description
Send fax later Allows a fax to be sent at a later time and date.
Stop Recv to PC Disables the Receive to PC setting that allows a computer to upload all current faxes that have
not been printed and all future faxes received by the product.
Reprint last Reprints the faxes that are stored in the product memory.
Polling receive Allows the product to call another fax machine that has polling send enabled.
Clear saved faxs Clears all faxes in the product memory.
14 Chapter 2 Control panel menus (M1210 Series only) ENWW
