200
Chapter 11 Novell LineJet Print Server Configuration (10/100Base-T)
3. Look under the “Novell” section and add the new password to the
“Pserver Password” field.
4. Click on the SUBMIT button when done and physically re-power the
printer to make the new settings take effect.
Print Server Setup - Manual (Telnet) Method
1. Telnet to the print server. This will bring up a login screen:
telnet
ipaddress
2. You should now see a prompt displayed that has the LineJet Print
Server’s IP address followed by a colon then
root.
ipaddress
:root>
3. At the prompt, enter:
store pserver novell passwd
password
4. Reset the unit to ensure the changes take effect.
reset
Adjusting Polling Time (NDS & Bindery)
You can set the poll time the LineJet Print Server will use when checking for
new jobs under a PSERVER setup. To do this, complete the following steps.
Netware 4.x
1. Log in to NetWare Administrator as a user with security equal to “Admin”
on your Novell host.
2. Double click on the printer object for which you wish to change the poll
time. This will bring up the printer objects details pages.
3. Click on “Configuration” to display the configuration page.
Note The passwords entered in Netware Administrator or PCONSOLE must
match the password set on the unit.
Note
If prompted for a User ID and password first, type in
root
for the ID and
press ENTER at the password prompt since there is no password by
default.
Note The passwords entered in Netware Administrator or PCONSOLE must
match the password set on the unit.
