202
Chapter 11 Novell LineJet Print Server Configuration (10/100Base-T)
HTML Method
1. Load a Web browser on a network station that can communicate with the
print server over TCP/IP.
2. Direct your Web browser to URL:
http://
LineJetIPaddress
/adminConf.html
(e.g., http://192.75.11.9/adminConf.html)
3. Look under the “System Information” section and enter the new name into
the “Name” field.
4. Click on the SUBMIT button when done and physically re-power the
printer to make the new settings take effect.
Manual (Telnet) Method
1. Telnet to the print server. This will bring up a login screen:
telnet
ipaddress
2. You should now see a prompt displayed that has the LineJet Print
Server’s IP address followed by a colon then
root
.
ipaddress
:root>
3. At the prompt, enter:
store pserver name
name
4. Reset the unit to ensure the changes take effect.
reset
Changing The Frame Type (NDS & Bindery)
The LineJet Print Server allows the user to store a particular frame type for
the unit to adhere to in a Novell environment.
HTML Method
1. Load a Web browser on a network station that can communicate with the
print server over TCP/IP.
Note
If prompted for a User ID and password first, type in
root
for the ID and
press ENTER at the password prompt since there is no password by
default.
Note
If prompted for a User ID and password first, type in
root
for the ID and
press ENTER at the password prompt since there is no password by
default.
