105
Setup Menu
Listening Mode Setup
—Continued
A (Default):
Outputs the source only from the
subwoofer connected to the SUBWOOFER PRE OUT
A terminal.
B:
Outputs the source only from the subwoofer
connected to the SUBWOOFER PRE OUT B terminal.
A+B:
Outputs the source from the subwoofers
connected to the SUBWOOFER PRE OUT A and
SUBWOOFER PRE OUT B terminals.
Not Used:
No subwoofers are used for playback.
This option defaults to “A.”
This sub-menu allows you to configure the audio effect
and playback options when you play a source in the
Direct or Pure Audio listening mode.
a. Front Speaker
This option configures the front speakers to use when
playing the source in the Direct or Pure Audio listening
mode. Select the speakers you want to use. This setting
can be made when the “(Speaker B) Front L/R” is set to
“Main A” in the Speaker Configuration sub-menu.
A (Default):
Outputs the source from the front speakers
configured to “Speaker A.”
B:
Outputs the source from the front speakers
configured to “Speaker B.”
A+B:
Outputs the source from the front speakers
configured to “Speaker A” and “Speaker B.” Note that
this option is not available when the front speakers are
in Bi-amp configuration.
b. Center Speaker
This option configures the center speaker to use when
playing the source in the Direct or Pure Audio listening
mode. Select the speaker you want to use. This setting
can be made when the “(Speaker B) Center” is set to
“Main A” in the Speaker Configuration sub-menu.
A (Default):
Outputs the source from the center speaker
configured to “Speaker A.”
B:
Outputs the source from the center speaker
configured to “Speaker B.”
A+B:
Outputs the source from the center speakers
configured to “Speaker A” and “Speaker B.”
c. Surr L/R Sp
This option configures the surround speakers to use
when playing the source in the Direct or Pure Audio
listening mode. Select the speakers you want to use.
This setting can be made when the “(Speaker B) Surr L/
R” is set to “Main A” in the Speaker Configuration sub-
menu.
A (Default):
Outputs the source from the surround
speakers configured to “Speaker A.”
B:
Outputs the source from the surround speakers
configured to “Speaker B.”
A+B:
Outputs the source from the surround speakers
configured to “Speaker A” and “Speaker B.”
d. Surr Bk Speaker
This option configures the surround back speakers to
use when playing the source in the Direct or Pure Audio
listening mode. Select the speakers you want to use.
This setting can be made when the “(Speaker B) Surr
Back” is set to “Main A” in the Speaker Configuration
sub-menu. However, when the “(Speaker A) Surr Back”
is set to “Bi-Amp for Front” or “Not Used,” this setting
will not be displayed.
• When the settings for “(Speaker A) Surr Back” and
“(Speaker B) Surr Back” in the Speaker Configuration
sub-menu differ, the available options will be “A” and
“B.”
A (Default):
Outputs the source from the surround back
speakers configured to “Speaker A.”
B:
Outputs the source from the surround back speakers
configured to “Speaker B.”
A+B:
Outputs the source from the surround back
speakers configured to “Speaker A” and “Speaker B.”
e. Subwoofer
This option configures the subwoofer to use when
playing the source in the Direct or Pure Audio listening
mode. Select the terminal to which the subwoofer you
want to use is connected. This setting can be made when
the “(Speaker A) Subwoofer” is set to an option other
than “Not Used” in the Speaker Configuration sub-menu.
However, when the “(Speaker B) Subwoofer” is set to an
option other than “Main A” in the Speaker Configuration
sub-menu, the available options will be “A” or “Not
Used.”
A (Default):
Outputs the source only from the subwoofer
connected to the SUBWOOFER PRE OUT A terminal.
B:
Outputs the source only from the subwoofer
connected to the SUBWOOFER PRE OUT B terminal.
A+B:
Outputs the source from the subwoofers
connected to the SUBWOOFER PRE OUT A and
SUBWOOFER PRE OUT B terminals.
Not Used:
No subwoofers are used for playback.
This sub-menu allows you to configure the audio effect
and playback options when you play an analog
multichannel source such as DVD-Audio and Super
Audio CD.
This sub-menu appears when the multichannel terminal
board [E] is inserted.
a. SB Mode (5ch)
This option selects the enhancement mode for playback
when you play a 5.1ch analog multichannel source as a
6.1 or higher channel source through the RDC-7.1. The
surround back setting you select here will be applied to
all of the multichannel input signals.
• This option will not appear when the Surr Back
Channel setting in the Audio Assign sub-menu is set
to “SBL/SBR (7.1ch).”
Direct, Pure Audio Setup Sub-menu
Multichannel Input Setup Sub-menu
