ENGINE TOP E ND 4-3
Specifications
Item Standard Service Limit
Cylinder Head
Cylinder Compression (Usable range) –––
755 ∼ 1 177 kPa (7.70 ∼ 12.0 kgf/cm²,
109 ∼ 171 psi)
Cylinder head warp ––– 0.03 mm
Cylinder, Piston
Cylinder Inside Diameter (15 mm below
from the Cylinder Top End)
44.500 ∼ 44.515 mm 44.64 mm
Piston Diameter 44.453 ∼ 44.468 mm 44.30 mm
Piston/Cylinder Clearance 0.042 ∼ 0.052 mm –––
Piston Ring/Groove Clearance (Top,
Second)
0.02 ∼0.06 mm 0.16 mm
Piston Ring Groove Width (Top,
Second)
1.01 ∼ 1.03 mm 1.11 mm
Piston Ring Thickness (Top, Second) 0.97 ∼ 0.99 mm 0.90 mm
Piston Ring End Gap (Top, Second) 0.15 ∼ 0.35 mm 0.65 mm
Piston Pin Diameter 11.995 ∼ 12.000 mm 11.96 mm
Piston Pin Hole Diameter 12.001 ∼ 12.011 mm 12.08 mm
Small End Inside Diameter
16.002 ∼ 16.013 mm 16.05 mm
Special Tool - Piston Pin Puller Assembly: 57001-910
