A SERVICE OF

logo

Open as PDF
next previous
19
Using the Listening Modes
•
This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
Dolby Pro Logic IIx/Dolby Pro Logic II
This mode expands any 2 ch source for 7.1-ch playback.
It provides a very natural and seamless surround-sound
experience, keeping the sound clear.
•
In case of 5.1 ch without surround back speaker, the
mode becomes Dolby Pro LogicII instead of Dolby Pro
Logic IIx.
– PLIIx Movie/PLIIMovie: Use this mode with any 2 ch
movie.
– PLIIx Music/PLIIMusic: Use this mode with any 2 ch
music source.
– PLIIx Game/PLIIGame: Use this mode with any 2 ch
game source.
•
Input source: STEREO, 5.1 ch (PLIIx Movie and PLIIx
Music only)
•
Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch, 7.1 ch
surround back (PLIIx Movie and PLIIx Music only)
Dolby TrueHD
This mode is for use with Dolby TrueHD sources. The audio
from the input source is output as-is, without surround
sound processing.
•
Input source: 5.1 ch, 7.1 ch
•
Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch
•
This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
DSD
This mode is for use with DSD sources. The audio from
the input source is output as-is, without surround sound
processing.
•
Input source: 5.1 ch
•
Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch
•
This unit supports DSD signals input through HDMI IN.
However, depending on the connected player, better
sound is possible when output from the PCM output of
the player. In that case, configure the player for PCM
output.
•
This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
DTS
This mode is for use with DTS sources. The audio from
the input source is output as-is, without surround sound
processing.
•
Input source: 5.1 ch
•
Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch
•
This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
DTS 96/24
This mode is for use with DTS 96/24 sources. The audio
from the input source is output as-is, without surround
soundprocessing.With96kHzsamplingrateand24-bit
resolution, it provides superior fidelity.
•
Input source: 5.1 ch
•
Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch
•
Depending on the settings, this listening mode becomes
DTS.
•
This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
DTS Express
This mode is for use with DTS Express sources. The audio
from the input source is output as-is, without surround
sound processing.
•
Input source: 5.1 ch
•
Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch
•
This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
DTS-HD HR (DTS-HD High Resolution Audio)
This mode is for use with DTS-HD High Resolution Audio
sources. The audio from the input source is output as-is,
without surround sound processing.
•
Input source: 5.1 ch, 7.1 ch
•
Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch
•
This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
DTS-HD MSTR (DTS-HD Master Audio)
This mode is for use with DTS-HD Master Audio sources.
The audio from the input source is output as-is, without
surround sound processing.
•
Input source: 5.1 ch, 7.1 ch
•
Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch
•
This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
DTS Neo:6
This mode expands any 2 ch source for 5.1 ch multichannel
surround playback. It offers full-bandwidth on all channels,
with great independence between the channels. There are
two variants for this mode: one ideal for movies and another
ideal for music.
– Neo:6Cinema: Use this mode with any 2 ch movie.
– Neo:6Music: Use this mode with any 2 ch music
source.
– Neo:6: Use this mode to expand any 5.1 ch music
source for 6.1 ch or 7.1 ch playback using Neo:6.
•
Input source: STEREO (Neo:6 Cinema and Neo:6 Music
only), 5.1 ch (Neo:6 only)
•
Speakerconfiguration:3.1ch,5.1ch,7.1ch(Neo:6
Cinema and Neo:6 Music only), 7.1 ch surround back
(Neo:6 only)
ES Discrete (DTS-ES Discrete)
This mode is for use with DTS-ES Discrete sources and
enables 6.1 ch or 7.1 ch playback using surround back
channel. Completely discrete seven channels will improve
spatial imaging and enable 360-degree sound localization
producing a sound crossing between the surround
channels.
•
Input source: 6.1 ch
•
Speaker configuration: 7.1 ch surround back
•
This listening mode can be selected only if your Blu-ray
Disc/DVD player is digitally connected to the unit or the
player's output setting is bitstream.
•
Use on the DVD with DTS ES logo, particularly on the
software containing DTS-ES Matrix soundtrack.