Advanced Settings
32
Dolby
Make the settings for Dolby listening mode.
Setting Item Default Value Setting Details
PLIIx Music
(2ch Input)
Panorama
Off Adjust the sound field setting for playing any 2 ch
digital source such as Dolby Digital or 2 ch analog/
PCM source in the Dolby PrologicII Music listening
mode. Select the width of sound field.
"On": Width of sound field will be increased.
"Off": Default value
PLIIx Music
(2ch Input)
Dimension
0 Adjust the sound field setting for playing any 2 ch
digital source such as Dolby Digital or 2 ch analog/
PCM source in the Dolby PrologicII Music listening
mode. Select the depth of sound field.
"-3" to "+3": The sound field shifts forward as the set
value becomes smaller than "0" and backward if the
set value become larger than "0".
PLIIx Music
(2ch Input)
Center Width
3 Configure the setting to use for playing any 2 ch
digital source such as Dolby Digital, or 2-ch analog/
PCM source in the Dolby PrologicII Music listening
mode. Adjust the width of the sound from the center
speaker).
"0" to "7": The smaller the setting value is, the more
concentrated in the center speaker is the sound, while
the larger the setting value is, the more distributed to
the front left and right speakers is the sound of the
center speaker.
PLIIz Height Gain Mid Adjust the output level of the height speakers in the
Dolby Pro Logic IIz Height listening mode.
The output of the height speakers will be enhanced in
the order of "Low", "Mid" (Middle), "High": "Low", "Mid"
and "High".
•
The setting cannot be changed if "Height" is set to
"None" in "Speaker Configuration".
Dolby EX
Dolby EX
Manual If the source signal contains a Dolby EX flag, the
Dolby Digital EX listening mode or THX Surround is
automatically selected.
"Auto": Use this function
"Manual": Select the desired listening mode
•
The setting cannot be changed if "Back" is set to
"None" in "Speaker Configuration".
Setting Item Default Value Setting Details
Loudness
Management
On Enable the Late Night function that allows you to enjoy
surround sound of Dolby TrueHD playback even in low
volume.
"On": Use this function
"Off": Do not use this function
•
Depending on the setting of "Back" in "Speaker Configuration", the display will be changed. "PLllx" will
be displayed as "PLllx/PLII".
DTS
Make the settings for DTS Neo:6 Music listening mode.
Setting Item Default Value Setting Details
Neo:6 Music
Center Image
2 Adjust the width of the sound field of the front
channel when playing in the DTS Neo:6 Music
listening mode.
"0" to "5": Selecting a smaller value brings the
sound field of the front channel to the center while
selecting a larger value spreads the sound field of
the front channel to left and right.
Theater-Dimensional
Make the settings for Theater-Dimensional mode.
Setting Item Default Value Setting Details
Listening Angle Wide Set the angle of the front left and right speakers
relative to the listening position when playing in
the Theater-Dimensional listening mode.
"Narrow": Less than 30°
"Wide": Greater than 30°
•
Values recommended for "Listening Angle" are: 20° when "Narrow" is selected and 40° when "Wide"
is selected.
