A SERVICE OF

logo

General Installation
118 Installation Manual
2.4.11 System Connection
*1
To connect two main units, use the optional System Inter Connection Cards (two) and the
Connection Cable (included in the cards).
1. Insert the upper side of the System Inter Connection Card into two hooks on the main unit
(Master System).
2. Press down the two corners of the lower side of the System Inter Connection Card.
3. Connect the cord to the System Inter Connection Card connector.
4. Open the latch on the card.
5. Repeat steps 1 through 4 for the Slave System, using the other card.
6. Insert one Connection Cable end into the Master System and insert the other end into the
Slave System.
*1
Available for the KX-TD1232 only.
System Inter Connection Card
KX-TD192 SYSTEM INTER CONNECTION
System Inter Connection Card