A SERVICE OF

logo

PCAN-PC/104 – User Manual
11
In order to know how to start the computer's BIOS setup please
consult the corresponding documentation. Usually you can enter
the BIOS setup by pressing the key [Del] or [F2] shortly after
switching on the computer.
In the BIOS setup itself you can often find the settings for the
interrupts under a menu item containing the text “PnP”. For the
interrupt(s) used by PCAN-PC/104 change the setting to “Reserved”
or “Legacy ISA”.
2.4 Connecting a CAN Bus
A High-speed CAN bus (ISO 11898-2) is connected to one of the
9-pin D-Sub ports of the slot bracket. The pin assignment
corresponds to the CiA recommendation DS 102-1.
Figure 4: Pin assignment HS-CAN
(view onto connector of the slot bracket)