A SERVICE OF

logo

PCAN-PC/104 – User Manual
8
Figure 2: Position of the jumper fields for setting the I/O base addresses,
JP3 for CAN channel 1 (left jumper field),
JP4 for CAN channel 2 (right jumper field, Dual Channel version only)
The following table shows the possible settings. The X stands for a
set jumper. The default settings at delivery for CAN channels 1 and
2 are highlighted.
Jumper field JP3/JP4
A B C D E
I/O address range
X 200h 21Fh
X X 220h 23Fh
X X 240h 25Fh
X X X 260h 27Fh
X X 280h 29Fh
X X X 2A0h 2BFh
X X X 2C0h 2DFh
X X X X 2E0h 2FFh
X X 300h – 31Fh
X X X 320h – 33Fh
X X X 340h 35Fh
Continued on the next page