15
D
ue to many reasons, such as poor cable
reception, the picture can sometimes
appear slightly ÒspeckledÓ (an indication of
signal noise in the picture). The DNR
(Dynamic Noise Reduction) control can help
eliminate this type of interference and
improve the quality of the picture.
1
Press the MENU button on the
remote to show the onscreen menu.
PICTURE will be highlighted.
2
Press the CURSOR RIGHT and the
menu will shift to the left. BRIGHTNESS
will be highlighted and an adjustment bar
will be shown to the right.
3
Press the CURSOR DOWN repeated-
ly until the DNR control is highlighted.
4
Press the CURSOR RIGHT or
LEFT to turn the control ON or OFF.
5
Press the STATUS/EXIT button to
remove the menu from the screen.
HOW TO
USE THE DNR (DYNAMIC NOISE REDUCTION) CONTROL
