60
English
14.1 Reset
If desired, you can restore the Center or Station
to their default settings (including the network
settings).
Helpful hint:
– Restoring to default settings does not delete any
stored music tracks
When to reset the Center or Station:
– Resetting the Center or Station helps to re-
establish the Wi-Fi connection between the
Center and Station.
– Change the way the Center or Station
connects to an external Wi-Fi/wired network.
1 Check that the set is switched on (see 5.Basic
functions).
2 Press MENU to enter the menu screen
3 Press the navigation controls 3 or 4 and 2 to
enter Settings followed by Restore settings.
4 Press 2 to select Yes
➜ The set is rebooted. Language selection
screen appears.
5 Select your desired language: English, Français,
Español, Nederlands, Italiano or Deutsch
➜ The set enters Installation Mode
➜ The search for Center or Stations starts.The
Wi-Fi connection is being re-established
If the Center is reset and Stations are not
reset:
6 On the Stations, enter Installation Mode
a. Remove the power plug of the Stations and
connect them to the power supply again
➜ Connecting to Center appears
b. On the remote control, press MENU to
enter Installation Mode
c. Press the navigation controls 3 or 4 and 2 to
enter Installation Mode
➜ The Stations start to connect to the Center
If a Station is reset and the Center is not:
7 On the Center, select HD mode and enter
Installation Mode
a. Press MENU to enter the menu screen
b. Press the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu
c. Press 3 or 4 and 2 to select Add New
Station
➜ Searching for Stations starts
If both the Center and Stations are reset:
8 Select language and then enter installation mode.
9 Press STOPÇ on the Center when all the
Stations are found.
Helpful hint:
– After restoration to default settings, the network
mode will go back to Ad-Hoc mode.
14. Reset
pg001-pg068_WACS7000_Eng 2007.2.3 11:06 AM Page 60
