A SERVICE OF

logo

Open as PDF
next previous
9
543175 Rev. H, June 25, 2013
Evacuate the A/C System
1 Ensureservicehosesareconnected,andcoupler
valvesareOPEN
2 PressVACUUM
3
PressSTART / YEStoacceptthedefaultevacuation
timeof10minutes,orenterthedesiredvacuumtime
usingthenumberkeys,andpressSTART / YES
IMPORTANT: The unit pulls a vacuum on the
vehicle A/C system to remove air and boil off
moisture that may be present in the system.
Evacuate the system for at least 10 minutes,
or follow the A/C system manufacturer’s
specications, to ensure adequate moisture
and contaminant removal.
4 TheunitevacuatestheA/Csystemandstopswhen
thespeciedamountoftimehaselapsed
PressSTOP / NOtopausetheprocessPress
START / YEStoresume,orSTOP / NOagain
toexit
YouarenowreadytoreplenishtheA/Csystemwith
newoil,ifnecessary,ortorechargethesystemwith
refrigerant
Operating Instructions
Operating Tips
• If the vacuum pump has run for 10 or more
hours without an oil change, the unit displays
VACUUMOILTIMEXX:XX
CHANGEOILNOW?
Refer to instructions outlined in the Maintenance
section under Change Vacuum Pump Oil.
•
Before the unit begins evacuating the A/C
system, it checks for any pressure in the
system that might damage the vacuum pump.
If pressure is detected, the unit displays
PRESSUREEXISTS
PRESSANYKEYTOEXIT
Press any key to exit, and recover refrigerant
before proceeding.