Chapter 5 Universal Repeater Mode
WAP3205 v2 User’s Guide
39
5.7.2 Static WEP
Figure 22 Universal Repeater Mode: Wireless LAN > Universal Repeater: Static WEP
The following table describes the labels in this screen.
Table 17 Universal Repeater Mode: Wireless LAN > Universal Repeater: Static WEP
LABEL DESCRIPTION
Universal Repeater Parameters
Enable Select this option to have the WAP3205 v2 connect to the specified access point.
SSID Enter the name of the access point to which you are connecting.
MAC Address
(Optional)
Enter the MAC address of the access point to which you are connecting.
Channel Selection Set the operating frequency/channel depending on your particular region.
Select a channel from the drop-down list box. The options vary depending on the
frequency band and the country you are in.
Security Mode Select Static WEP if the access point to which you want to connect uses WEP data
encryption.
PassPhrase Enter a passphrase (up to 26 printable characters) and click Generate.
A passphrase functions like a password. In WEP security mode, it is further converted by
the WAP3205 v2 into a complicated string that is referred to as the “key”. This key is
requested from all devices wishing to connect to a wireless network.
WEP Encryption Select 64-bits or 128-bits.
This dictates the length of the security key that the network is going to use.
