Filter
Top Products
3Com Router 6000 Family
Installation Manual
Chapter 8
Installing B68 Cabinets
3Com Corporation
8-9
1) Cabinet retaining nut 2) Cabinet foot
3) Anchor strip retaining nut 4) Downside of the cabinet
Figure 8-10 Lock cabinet feet
8.2.5 Combining Cabinets
Skip this section if you only install one cabinet.
If multiple cabinets are used, follow these steps to connect them together:
1) Remove the cabinet covers as shown in
Figure 8-11 .
2) Rotate the combining brackets on top of the cabinets 180 degrees, tighten them,
and connect the cabinets with flat washers, spring washers, bolts and nuts, as
shown in
Figure 8-12.
3)
Figure 8-11 illustrates the original position of the combining brackets and Figure
8-12 illustrates the position after they are rotated.