3M 05 de 3M Paint Sprayer User Manual


  Open as PDF
of 22
 
3
3
4
CAUTION
To reduce the risks associated with lifting and handling:
• Alwaysfollowproperliftingandhandlingpracticeswhenmovingsystem
components.
To reduce the risks associated with tripping, falling and tipping:
• Routeairhosesandanyextensioncordsawayfromtrafcareas,sharp
edges, moving parts and hot surfaces. Do not pull on air hoses to move the
compressor.
To reduce the risks associated with hazardous air pressure:
• Maintainsprayequipmentper3Mcareandcleaninginstructionsinthe
applicable owner’s manual.
• Ensureairinputpressureandallapplicatorsystemregulatorsareproperly
adjusted per materials recommendations prior to each use.
• Alwaysfollowrequiredairpressurereliefproceduresforrelievingairpressure
from the unit.
To reduce the risks associated with compression spring release:
• Maintainarmgriponuidadjustmentknobwhenremoving.
To reduce the risks associated with environmental contamination:
• Spraymaterials,solvents,othercleaningmaterialsandelectroniccomponents
must be disposed of per federal, state and local regulations.
WARNING
To reduce the risks associated with all residual hazards:
• Read,understand,followandretainforfuturereferenceallsafetystatements
in each applicable equipment owner’s manual and refer to the applicable
Material Safety Data Sheet and material container label for each material to be
sprayed before using your 3M equipment.
• Thisequipmentistobeusedonlybyprofessionalsfamiliarwiththepossible
applicable safety hazards.
• Donotusethisproductaroundunsupervisedchildren.
• Nevermodifyanypartofthisproduct.
• Alwayscomplywithlocal,state,andnationalcodesgoverningventilation,re
protection, operation, maintenance, housekeeping and disposal plus all safety
statements in applicable owner manuals, MSDS and material container labels.
To reduce the risks associated with chemical exposure:
• Checksprayequipmentfordamageandproperfunction.Repairorreplace
worn, damaged or malfunctioning components.
• Alwayswearappropriate,approvedpersonalprotectiveequipmentforeye,
skin, respiratory and hearing protection per the applicable MSDS and material
container labels at all times when spraying.
To reduce the risks associated with fire and explosion:
• MustmaintainadequateventilationperapplicableMSDSandmaterial
container labels for each material being sprayed in the work area.
• Allignitionsourcessuchassmokingmustbekeptoutofthesprayarea.
• Alwaysmaintainareadilyavailable,approvedreextinguisherorother
approvedreghtingequipmentinthesprayarea.
• Alwayslocateaircompressorasfarawayfromsprayareaastheairsupply
hoses allow.
• NeverusesolventscontainingMethyleneChlorideandTrichloromethanefor
anyreasontoavoidapossibleviolent,explosivechemicalreactionwhen
exposedtoaluminumorzinc(refertothemanufacturer'sMSDSorcontact
materialsupplierifthereisanydoubttoconrmcompatibility).
 previous next