Filter
Top Products
SF/SG Series Operating Instructions
1. Zero Point Adjustment
The zero point is automatically adjusted when power is turned on. If the display shows
a positive or negative weight, the scale must be re-zeroed.
How to re-zero:
1. Assure that nothing is on the weigh pan.
2. Press
3.
“
0
0 0
0
”
should appear on the weight display
When weighing with a container, it is necessary to TARE out the weight of the container in order to
get an accurate price/weight reading.
How to operate TARE:
1. Place empty container (100g) on the weigh pan. Display reads
“
100
100 100
100
” :
2. Press
3. The weight display display should read:
4. When removing the weight from the pan the display reads “
-100
100 100
100
”
ZERO
0
NET ZERO
0.000
0.0000.000
0.000
0.000
0.0000.000
0.000
NET
ZERO
Table top type Tower type
2. Tare Adjustment
T
TARE
Note:
When a TARE weight has been set, it is not possible to set a new TARE weight of
a lower value by the instructions above. It is necessary to delete the previous TARE
first, before entering a TARE of lower value.
0.000
0.0000.000
0.000
0.000
0.0000.000
0.000
NET
ZERO
NET ZERO
Table top type Tower type
5