Filter
Top Products
SF/SG Series Operating Instructions
4. Setting Unit Price
1. Enter Unit Price by 10 key pad. Up to 6 digits may be entered.
The example below shows the entry of a unit price of $5.50:
2. Unit price entry must be completed within 3 seconds. Any delay beyond 3 seconds
will require the unit price to be re-entered.
Note about keyboard TARE:
1. If you enter a tare weight greater than the weighing capacity of the scale an error message
will display:
“ Err tr ”
2. When a TARE weight has been set, it is not possible to set a new TARE weight of a lower value by the
instructions above. It is necessary to delete the previous TARE first, before entering a TARE of lower value.
3. Any previous TARE entries will be cancelled when the
key is pressed.
4.
To cancel a TARE weight that has been entered, remove any weight from the weigh pan
and press
0
ZERO
T
TARE
NET ZERO
0.000
0.0000.000
0.000
WEIGHT
UNIT PRICE
------
------------
------
PRICE
Err tr
Example
0.000
0.0000.000
0.000
WEIGHT
NET ZERO
UNIT PRICE
5.50
5.505.50
5.50
PRICE
0.00
0.000.00
0.00
7