AEG PV 2000 Welding System User Manual


 
5
LIMITED WARRANTY
The limited warranty provided by AEG Power Solution (“AEG PS”) in
this Statement of Warranty applies only to Equipment purchased for
residential, commercial or industrial use in the ordinary course of the
business.
TERMS OF WARRANTY
AEG PS warrants that it is sufficiently experienced, properly qualified,
registered, licensed, equipped, organized and financed to perform the
Work in compliance with the terms of this Agreement.
AEG PS warrants that the Equipment shall be free from defects in de-
sign, materials and workmanship for a period of sixty (60) months from
the date of commissioning when AEG PS authorized service personnel
performed the commissioning and start-up of the Equipment, but not
longer than sixty six (66) months from the date of notification that the
goods are ready for dispatch, whichever occurs first.
In the event that the Equipment fails to meet the foregoing warranty,
AEG PS undertakes to repair and/or replace any part found to be faulty
due to errors in design or manufacture, or to be made of faulty mate-
rials if trained & authorized AEG PS personnel has conduct commissio-
ning and start-up of the Equipment.
An AEG PS Commissioning and Start-Up Service must be performed/
completed by AEG PS or by authorized service personnel. If not,
the on-site Warranty will be voided and replacement of defective parts
only will be covered.
AEG PS shall have no liability and no obligation to repair the installed
Equipment if non-authorized personnel performed the start-up and
such start-up caused the Equipment to be defective.
In addition, the Warranty does not cover defects originating from the
materials provided by the Purchaser, a design imposed by the
Purchaser, incidents brought about by contingencies or acts of God
or any other cause the vendor could not reasonably be expected to
foresee or whose consequences it could not prevent, repairs or replace-
ments imposed by normal wear and tear of the equipment, damage or