Agilent Technologies 5749A Welding System User Manual


 
1 Quick Reference
8 Series N5700 User’s Guide
The Agilent N5700 DC Power Supplies – At a Glance
The Agilent Technologies Series N5700 System DC Power Supplies
are general-purpose, 1U (rack unit) high, switching power supplies
that are available with a wide variety of output voltage and current
ratings.
These power supplies are power-factor corrected and operate from a
worldwide AC voltage range. Output voltage and current are
continuously displayed and LED indicators show the complete
operating status of the power supply.
The front panel controls allow the user to set the output parameters,
over-voltage, under-voltage, and over-current protection levels, and
preview the settings.
The rear panel includes the necessary connectors to control and
monitor the power supply operation by analog signals or by the built-
in remote communication interfaces.
Output Features
Constant voltage/constant current with automatic crossover.
High-resolution voltage and current front panel controls.
Accurate voltage and current readback.
Independent edge-triggered external shut-off, and level-
triggered external enable/disable.
Parallel master/slave operation with active current sharing.
Remote sensing to compensate for voltage drop in load leads.
Analog output programming and monitoring.
System Features
Built-in GBIB/LAN/USB interface.
A built-in Web server that lets you control the instrument
directly from an internet browser on your computer.
Zero-gap stacking - no ventilation holes at the top and bottom
surface of the power supply.
Universal input voltage with active power factor correction.
Fan speed control for low noise and extended fan life.