Filter
Top Products
85036B/E 2-3
Specifications
Mechanical Specifications
Mechanical Specifications
The mechanical specifications in Table 2-2 apply to the devices in the 85036B and the
85036E 75 Ω type-N calibration kits.
Supplemental Mechanical Characteristics
Supplemental characteristics are values which are typically met by a majority of the
calibration kit devices tested at Agilent. These supplemental characteristics are intended
to provide information useful in calibration kit applications by giving typical, but
non-warranted performance parameters. Table 2-3 lists the typical characteristics of the
devices in this kit.
Table 2-2 Mechanical Specifications
Device Specification
Type-N Male Open Inside diameter of outer conductor: 6.985 to 7.010
Type-N Male Short Inside diameter of outer conductor: 7 ±0.015 mm
Distance from reference plane to shorting plane: 5.29 ±0.013 mm
Table 2-3 Mechanical Characteristics
Device Characteristic
Type-N Male Short Diameter of male pin: 0.897 ±0.013 mm
All Type-N Male Connectors Pin depth: 0.207 to 0.210 inch
All Type-N Female Connectors Pin depth: 0.204 to 0.207 inch