Filter
Top Products
378 Chapter5
One-Button Measurement Functions
Trace/View (Burst Power)
One-Button Measurement Functions
5.9.2 Combined
Pressing Combined displays measurement results the same as RF Envelope, but has a blue
bar between the markers to indicate the measured output power level. The actual measure
output power is displayed at the bottom of the bar. Refer to the following figure.
Key Path:
Trace/View
History: Added with firmware revision A.02.00
5.9.3 Trace
One-button measurements do not change this function. See “Trace” on page 284 for more
information.
5.9.3.1 Trace
(1 2 3)
Determines which trace the menu keys will affect. Press Trace123until the number of the
desired trace is underlined.
Key Path:
Trace/View, Trace
State Saved: Saved in Instrument State for all traces
History: Added with firmware revision A.02.00
Remote Command:
:TRACe[1]|2|3:MODE WRITe|MAXHold|MINHold|VIEW|BLANk
WRITe =
Clear Write
MAXHold = Max Hold
MINHold = Min Hold
VIEW = View