AT-FS238a/x and AT-FS238b/x Series Installation Guide
5
Figure 5 illustrates the power connector provided with the unit.
Figure 5 Power Connector for the 12-50VDC Version Converter
Key Features
The AT-FS238a/x and AT-FS238b/x Series Bridging Converters have the
following features:
❑ LEDs for unit and port status
❑ Auto MDI/MDI-X
❑ Mode selection button that toggles between Link Test, MissingLink ,
and Smart MissingLink
❑ DIP switches for configuring the ports
❑ Half- or full-duplex operation on both ports
❑ RJ-45 twisted pair connector
❑ SC fiber optic connector
❑ Data packet forwarding and filtering at full wire speed (10 Mbps to
100 Mbps, and 100 Mbps to 100 Mbps)
❑ Store and forward switching mode
❑ Automatic address learning and aging
❑ IEEE 802.3u compliant auto-negotiation
❑ External power adapter (depending on the model)
❑ For use on a desktop or in an AT-MCR12 chassis