Filter
Top Products
AT-S63 Management Software Features Guide
Section IV: SNMPv3 207
Configure SNMPv3 Notify Table
Configure SNMPv3 Target Address Table
Configure SNMPv3 Target Parameters Table
You start the message notification configuration by defining the type of
message you want to send with the SNMPv3 Notify Table. Then you
define a IP address that is used for notification in the Configure SNMPv3
Target Address Table. This is the IP address of the SNMPv3 host. Finally,
you associate the trap information with a user by configuring the Configure
SNMPv3 Target Parameters Table.
See Figure 20 for an illustration of how the message notification tables are
linked.
Figure 20. SNMPv3 Message Notification Process
For a more detailed description of the SNMPv3 Tables, see the following
subsections:
“SNMPv3 User Table” on page 208
“SNMPv3 View Table” on page 208
“SNMPv3 SecurityToGroup Table” on page 208
“SNMPv3 Notify Table” on page 209
“SNMPv3 Target Address Table” on page 209
SNMPv3 Notify Table
SNMPv3 Target Address Table
SNMPv3 Target Parameter Table
SNMPv3 User Table
SNMPv3 View Table
SNMPv3 Access Table
SNMPv3 SecurityToGroup Table
Linked by View Name
Linked by Group Name
Linked by User Name
or Security Name
Linked by
Security Name
and
Security Model
Linked by Notify Tag
Linked by Target Parameter Name