Filter
Top Products
Chapter 1: Overview
36
Management Interfaces and Features
The AT-S63 Management Software has three management interfaces:
Menus interface
Command line interface
Web browser interface
You can use the menus and command line interfaces from a local
management session through the Terminal Port on the switch or remotely
with a Telnet or Secure Shell client. The web browser interface is used
from remote HTTP and HTTPS sessions using a web browser.
You can configure all the features and parameters of the switch from the
command line interface. However, the menus interface and the web
browser interface are limited in the number of functions that you can
perform. For example, you can configure the basic port settings (e.g.,
speed and duplex mode) for any interface, but VRRP can only be
configured using the command line interface.
Table 2 lists the functions supported by the three management interfaces.
Note
A stack of AT-9400 Basic Layer 3 Switches and the AT-StackXG
Stacking Module must be configured from the command line
interface.
(Y = supported feature)
Table 2. Management Interfaces and Features
Command Line
Interface
Menus Interface
Web Browser
Interface
Basic Operations
Switch’s name, location, and
contact
YYY
Manager and operator passwords Y Y Y
Date and time (manual and SNTP) Y Y Y
Rebooting a switch Y Y Y
TCP/IP pings Y Y Y