Filter
Top Products
6
3. ACCESSORIES
A. STANDARD ACCESSORIES
HEADSET:
This heavy-duty headset is designed to block out intense sounds often found in industrial environments so that the user may easily
hear the sounds received by the ULTRAPROBE. In fact, the standard headphones provide over 23 dB of noise attenuation.
WTG-1 WARBLE TONE GENERATOR:
The WTG-1 Tone Generator is an ultrasonic transmitter designed to flood an area with ultrasound. It is used for a special type of leak
test. 'When placed inside an empty container or on one side of a test item, it will flood that area with an intense ultrasound that will not
penetrate any solid but will flow through any existing fault or void. By scanning with the Trisonic
TM
Scanning Module, empty
containers such as pipes, tanks, windows, doors, bulkheads or hatches can be instantly checked for leakage. This Tone Generator is a
WARBLE TONE GENERATOR. This internationally patented transmitter sweeps through a number of ultrasonic frequencies in a
fraction of a second to produce a strong, recognizable "Warble" signal. The warble tone prevents a standing wave condition which can
produce false readings and provides for a consistency of testing in practically any material.
RUBBER FOCUSING PROBE:
The Rubber Focusing Probe is a cone-shaped rubber shield.
It is used to block out stray ultrasound and to assist in narrowing the field of reception of the “Trisonic"
Scanning Module.
STETHOSCOPE EXTENSION KIT:
This consists of three metal rods that will enable a user to reach up to 31 additional inches (78.7 cm) with the Stethoscope Probe.
5PC-C9 I/O CABLE:
Standard I/O cable for downloading records from the UP9000 to the serial port on a PC.
BCH-9 BATTERY CHARGER:
This is the standard battery charger for the UP9000 with a line input of 120VAC @ 60Hz . The charging time is about 8 hours. (For
countries with 220 V/ 50 Hz, the BCH 92 is considered a “Standard Accessory)
BCH-WTG BATTERY CHARGER:
This is the standard battery charger for all Warble Tone Generators that are used with the UP9000. The line input is 120 VAC @
60Hz and the charging time is about 8 hours. (For countries with 220V/50Hz, the BCH-92 is considered a “Standard Accessory”.)
B. OPTIONAL ACCESSORIES
LRM-9:
A cone shaped scanning module that increases the detection distance above standard scanning modules. The LRM-9 is ideal for high
voltage inspection and for locating leaks at great distances.
CFM-9:
A scanning module used for close proximity leak detection in pressure and vacuum systems.
UWC-9000:
The UWC-9000, Ultrasonic Waveform Concentrator, doubles the detection distance. The UWC-9000 is great for corona, tracking and
arc detection at safe distances. Includes carrying case
DHC-9HH:
Headphone headset is for use with a hard hat
DHC 1991 EAR PIECE:
Ear piece eliminates the need for standard headphones.
SA-2000 SPEAKER AMPLIFIER:
The SA-2000 is a loud speaker and amplifier that is compatible with the Ultraprobe headphone output jack.