Filter
Top Products
7
UFMTG-1991:
The UFMTG 1991 is a multi directional warble tone generator. It has a high power output with a circular transmission pattern of
360°.
WTG-2SP WARBLE PIPE THREADED TONE GENERATOR:
A Warble Tone Generator that is used in test conditions where it is not possible to physically place the standard WTG-1 Warble Tone
Generator, such as in pipes or in certain heat exchangers or tanks. Features: 1” NPT male threaded nipple with adapters for ¾” and ½”
female nipple with a 10 turn amplitude adjustment dial. Metric adapters available.
BP-9:
Extended use auxiliary battery pack for use with the UP9000.
BPA-9:
Spare battery pack for use with the UP9000.
BCH-92:
Optional battery charger for the UP9000 with a line input of 220 VAC @ 50Hz . The charging time is about 8 hours.
BCH-WTG2:
Optional battery charger for use with all Warble Tone Generators. The line input is 220 VAC @ 50Hz and the charging time is about
8 hours.
HTS-2:
Holster set for the UP9000. Includes a utility belt and two holsters, one for the UP9000 one module and rubber focusing probe; the
other for accessories.
SHEATH:
The sheath is a cordura cover protector for the UP9000 Pistol Housing.
LLA:
Liquid Leak Amplifier case. It holds 12 8 oz. Bottles of Liquid Leak Amplifier (For Ultrasonic Bubble Testing).
5PC-MP:
Optional I/O cable, 5 pin to miniphone for heterodyned output signal via the I/O connector on the UP9000.
5PC-BNC:
Optional I/O cable, 5 pin to BNC for heterodyned output signal via the I/O connector on the UP9000.
QCH-9:
Optional quick charge battery charger for the UP9000 with a line input of 120 VAC @60 Hz . The charging time is about 3 hours.
QCH-92:
Optional quick charge battery charger for the UP9000 with a line input of 230 VAC @ 50 Hz . The charging time is about 3 hours.